Pipes - Seamless, ERW, EFW, DSAW
and Forged

• Size Range: 1/8” NB - 80” NB
• Wall Thickness available: Schedule 5s - Schedule XXS (non standard upon request) Material Grades
• Alloy Steel - A335 P1, P5, P9, P11, P12, P22, P91
• Aluminium - 5083, 5154, 5251, 6061, 6063, 6082
• Carbon Steel - A106Gr.B/C, API 5L Gr.B
• Duplex & Super Duplex - UNS S31254, UNS S31803, UNS S32750 & S32760
• High Alloys - ALLOY 20, ALLOY C, ALLOY C276, ALLOY B2
• High Yield - API 5L X42, X52, X60, X65, X70
• Low Temperature - A333Gr.3/6
• Nickel Alloys - 200, 400, K500, 600, 625, 800, 825
• Stainless Steel - A312 304/L, 310, 316/L, 316Ti, 321/H, 347/H, 410, 440, 904L

Dimensions:
All Pipe is manufactured and inspected/tested to the relevant standards including ASTM, ASME, DIN, British Standard (BS), JIS and WERKSTOFFE

Caps, Crosses, Elbows, Concentric/ Eccentric Reducers

• Caps, Crosses, Elbows, Concentric/ Eccentric Reducers, Stub-Ends, Tees Seamless - DSAW, EFW, ERW, and Forged
• Nominal Size range: ¼” - 80”
• Wall Thickness available: Schedule 5s - Schedule XXS (non standard upon request)

Material Grades:

• Alloy Steel - A234 WP1, WP5, WP9, WP11, WP12, WP22, WP91
• Aluminium - 5083, 5154, 5251, 6061, 6063, 6082
• Carbon Steel - A234 WPB, WPC
• Duplex & Super Duplex - A815 UNS31803, UNS31254, UNS S32750 & S32760
• High Alloys - ALLOY 20, ALLOY C, ALLOY C276, ALLOY B2
• High Yield - WPHY42, 52, 60, 65, 70
• Low Temperature Steel - A420 WPL3, WPL6
• Nickel Alloys - 200, 400, K500, 600, 625, 800, 825
• Stainless Steel - A403 304/L, 310, 316/L, 316Ti, 321/H, 347/H, 410, 440, 904L

Manufacturing Approvals: NORSOK M650 REV 03

Dimensions
ANSI, ASME, BS 1640, B16.9, B16.25, B16.28, MSS, ASA
All Butt Weld Fittings are manufactured and inspected/tested to the relevant standards including ASTM, ASME, DIN, British Standard (BS), JIS and WERKSTOFFE

Flanges and Flanged Outlets

Flanges - Blind, Lap Joint, Orifice, Slip On, Socket Weld, Spectacle Blind, Threaded and Weld Neck Flanged Outlets - Flanged weldolets, Flanged nipolets, Flanged elbolets, Flanged latrolets, Flanged sweepolets

• Size Range: ¼” - 80”
• Wall Thickness available: Schedule 5s - Schedule XXS (non standard upon request)

Dimensions/Pressure Ratings:

• ANSI, MSS-SP-44, BS3293, API 605, API 6A - 150lb - 2500lb, 5K – 20K
• BS10 - Table D, E, F & H
• BS4504 - PN6, 10, 16, 25 & 64
• DIN - Standard
• JIS - Standard

Flange Facings available: Flat Face, Raised Face, Ring Type Joint and Tongue & Groove

MATERIAL GRADES

• Alloy Steel - A182 F1, F5, F9, F11, F12, F22, F91
• Aluminium - 5083, 5154, 5251, 6061, 6063, 6082
• Carbon Steel - A105, C22.8
• Duplex & Super Duplex - A182 F51, F44, UNS S32750 & S32760
• High Alloys - ALLOY 20, ALLOY C, ALLOY C276, ALLOY B2
• High Yield - A694 F42, F52, F60, F65, F70
• Low Temperature Steel - A350 LF2, LF3, LF6
• Nickel Alloys - 200, 400, K500, 600, 625, 800, 825
• Stainless Steel - A182 F304/L, F310, F316/L, F316Ti, F321/H, F347/H, F410, F440, 904L

Dimensions
All Flanges are manufactured and inspected/tested to the relevant standards including ASTM, ASME, DIN, British Standard (BS), JIS and WERKSTOFFE